Related Manuals for Philips DS9800WS
Summary of Contents for Philips DS9800WS
- Page 1 Always there to help you Register your product and get support at www.philips.com/welcome DS9800WS Question? Contact Philips User manual...
-
Page 3: Table Of Contents
6 Charge your iPod/iPhone/iPad 1 Important through USB socket Safety Notice 7 Update firmware Option 1: Update through Philips 2 Your Entertainment System SoundStudio (recommended) Introduction Option 2: Update through a USB What's in the box mass storage device or PC/Mac... -
Page 4: Important
1 Important o Risk of swallowing coin battery! • The device may contain a coin/button type battery, which can potentially be swallowed. Keep the battery out of reach of children at all times! If swallowed, the battery can cause Safety serious injury or death. -
Page 5: Notice
Remove batteries from products that are not in use for a longer period of time. Store batteries in a dry place. Philips and the Philips’ Shield Emblem are • Risk of injury: Wear gloves when handling leaking registered trademarks of Koninklijke Philips N.V. - Page 6 “Made for iPod, ” “Made for iPhone, ” and “Made for iPad” mean that an electronic accessory has been designed to connect specifically to iPod, iPhone, or iPad, respectively, and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards.
-
Page 7: Your Entertainment System
Philips offers, register your • charge your iPod/iPhone/iPad product at www.philips.com/welcome. through the USB socket. If you contact Philips, you will be asked for the model and serial number of What's in the box this apparatus. The model number and serial number are on the bottom of the apparatus. -
Page 8: Overview Of The Wireless Soundsphere Speakers
List of compatible iTunes host devices Overview of the wireless for AirPlay SoundSphere speakers In terms of AirPlay, DS9800WS is compatible with: • a Wi-Fi enabled PC/Mac installed with iTunes 10.2.2 (or later); and • the following iPod/iPhone/iPad models installed with the latest iOS version: Made for • iPhone 5... -
Page 9: Overview Of The Remote Control
Overview of the remote • Turn the unit on/off. control • (Press and hold) reset the unit. c MP3-LINK • Connect an external audio player through the supplied MP3 link cable. d ~ AC IN • Connect the power cord. e Speaker connectors (+/-) • Connect the two speakers through the supplied speaker cable. -
Page 10: Prepare
3 Prepare Unscrew the speaker connectors. Insert fully the end of a speaker cable with red mark into the left red (+) connector. Screw the left red (+) connector to secure Always follow the instructions in the cable. this chapter in sequence. Insert fully the end of a speaker cable without red mark into the left black (-) Connect... -
Page 11: Prepare The Remote Control
Connect the AC power cord to • the ~ AC IN socket on the back of the main speaker. • the wall power socket. Turn DS9800WS on After proper power connection, the unit switches on automatically. • Wait for successful boot-up of the unit. -
Page 12: Connect To Your Home Wi-Fi Network For Airplay
Fi network for iPhone/iPad or a Wi-Fi router' on page 12). enabled PC/Mac. AirPlay Before connection of DS9800WS to you home Wi-Fi network, make sure that: a your Wi-Fi router is powered on and working properly. b DS9800WS has been powered on and booted up successfully (see 'Turn DS9800WS on' on page 9). -
Page 13: Method 2: Connect To A Wps Router
» DS9800WS is connected to your existing home Wi-Fi network successfully. WIFI SETUP Method 2: Connect to a WPS router Note • Before you press any button on DS9800WS, make sure that DS9800WS has been booted up successfully (see 'Turn DS9800WS on' on page 9). -
Page 14: Method 3: Connect To A Non-Wps Wi-Fi Router
PBC function from the router configuration pages. See page 13). the user manuals of the specific routers for details. • If the WI-FI STATUS indicator on DS9800WS stays Open the built-in web page of DS9800WS yellow, it means that the Wi-Fi connection has failed. with the Internet Browser of your Wi-Fi Please wait for 2 minutes and try again. If the problem... - Page 15 After you finish manual Wi-Fi setting for DS9800WS, this new Wi-Fi network disappears. • If you fail to enter Assisted Wi-Fi Setup mode, power off DS9800WS and power on it, then try again after successful boot-up. • Make sure that there are no other Philips AirPlay- enabled devices in Assisted Wi-Fi Setup mode at the same time.
- Page 16 Select Philips_Install XXXXXX from the Option 2: Use your Wi-Fi enabled PC/Mac list of available networks. Note • See the user manual of your PC/Mac for how to connect your PC/Mac to a Wi-Fi network. • During Wi-Fi network connection, do not connect any network cable to your PC/Mac.
- Page 17 DS9800WS Launch Apple Safari browser or any other On the DS9800WS configuration web page, Internet browser on your Wi-Fi enabled you can configure the internal Wi-Fi settings device. of DS9800WS for connection of DS9800WS to your existing home Wi-Fi network. Type in 192.168.1.1 at the browser address bar and confirm. » The DS9800WS configuration Note web page is displayed.
- Page 18 Wi-Fi connection has failed. Please power off both your Wi-Fi router and DS9800WS and then power on them again to see whether DS9800WS can be connected to your home Wi-Fi network. If the problem remains, try the above procedures again.
- Page 19 Fi settings or rename your device through Safari If you use Safari on your Wi-Fi enabled PC/ Mac, you can also select 'Philips SoundSphere XXXXXX' from the Bonjour pull-down list to enter the DS9800WS configuration web page directly. Here, you can change the internal Philips SoundSphere XXXXXX Wi-Fi settings or rename your device easily.
-
Page 20: Play
Note • Make sure that your iTunes host device is connected to the same Wi-Fi network as DS9800WS. Your iTunes device can be an iPod touch/iPhone/iPad installed with iOS 4.3.3 (or later) or a Wi-Fi enabled PC/Mac installed with iTunes 10.2.2 (or later). - Page 21 Select Philips SoundSphere XXXXXX (or Select a media file and start play. user customized name) from the AirPlay » After a while, you will hear music from list. DS9800WS. XXXXXX Philips SoundSphere Note • If you fail to hear music after successful setup, do one of the following on your iPod touch/iPhone/iPad: •...
-
Page 22: Control Play
» After a while, you will hear music from DS9800WS. • If you are streaming music from a PC/Mac, to control music play from DS9800WS, launch iTunes and tick Allow iTunes audio control from remote speakers in Edit (for Windows) or iTunes (for Mac) -> Preferences... -> Devices. -
Page 23: Use Advanced Sound Settings
For advanced sound settings and additional features, you can use your iPod touch/ iPhone/iPad to download the Philips SoundStudio app from Apple App Store. It is a free application from Philips. • You can also upgrade the firmware of the device through the Philips SoundStudio app directly (see 'Option 1: Update through Philips SoundStudio (recommended)' on page 23). -
Page 24: Charge Your Ipod/Iphone/Ipad Through Usb Socket
6 Charge your • iPhone • iPad (4th generation) iPod/iPhone/iPad • iPad (3rd generation) through USB • iPad 2 • iPad socket • iPod touch (5th generation) • iPod touch (4th generation) • iPod touch (3rd generation) Note • iPod touch (2nd generation) •... -
Page 25: Update Firmware
7 Update firmware www.philips.com/support Warning XXXX • Always connect your DS9800WS to AC power for firmware upgrade. Never power off your DS9800WS during firmware upgrade. You can update the firmware either through a USB mass storage device (recommended) or from a PC/Mac. XXXX. zip Option 1: Update through On your PC/Mac, go to www.philips.com/ Philips SoundStudio support. - Page 26 To use an Internet browser other than Apple Safari on your PC/Mac, remember to go to the Wi-Fi router Note configuration page and write down the IP address of your DS9800WS. See the user manual of your Wi-Fi • router for how to find the IP addresses of devices In case the firmware update fails, you can upgrade connected to the Wi-Fi router.
-
Page 27: Product Information
8 Product General information information AC power Wireless SoundSphere speakers: 100-240V~, 50/60Hz Note Operation Power 22 W • Product information is subject to change without prior Consumption notice. Standby Power < 0.5 W Consumption Dimensions Specifications - Each speaker 265 mm (diameter) x 410 mm (height) Weight Amplifier... -
Page 28: Troubleshooting
If you encounter problems when using this apparatus, check the following points before requesting service. If the problem remains Wi-Fi network connection failed unsolved, go to the Philips web site (www. philips.com/welcome). When you contact Philips, • Check if your Wi-Fi router is Wi- ensure that the apparatus is nearby and the Fi 802.11b/g certified. - Page 29 • Turn off other Wi-Fi routers. No AirPlay icon on my iTunes host device • Make sure that DS9800WS is already connected to your home Wi-Fi network. • Before you open iTunes, make sure that you have enabled Bonjour service in your PC.
- Page 30 2013 © WOOX Innovations Limited. All rights reserved. Philips and the Philips’ Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used by WOOX Innovations Limited under license from Koninklijke Philips N.V. DS9800W_93_UM_EN_V2.0...