Table of Contents
Advertisement
4 Connect to
your home Wi-
Fi network for
AirPlay
To connect DS9800WS to your existing
home Wi-Fi network, you need to apply
your home Wi-Fi settings to DS9800WS.
Choose your best setup method based
on the preconditions listed below.
Precondition
You have an iPod
touch/iPhone/
iPad upgraded to
iOS 5.0 or later.
Your Wi-Fi router is
enabled with WPS
(Wi-Fi Protected
Setup) and supports
PBC (Push Button
Connection).
EN
10
Setup method
Choose method
1 (recommended)
(see 'Method 1: Use
Wi-Fi network login
sharing' on page 10).
Choose method
2 (see 'Method 2:
Connect to a WPS
router' on page 11).
You have a Wi-Fi
enabled device with
an Internet browser,
such as an iPod touch/
iPhone/iPad or a Wi-Fi
enabled PC/Mac.
Before connection of DS9800WS to you
home Wi-Fi network, make sure that:
a your Wi-Fi router is powered
on and working properly.
b DS9800WS has been powered on
and booted up successfully (see
'Turn DS9800WS on' on page 9).
Once connected successfully, DS9800WS
will remember your home Wi-Fi settings.
Then you can enjoy AirPlay whenever
DS9800WS is powered on and connected
to your home Wi-Fi network automatically.
Method 1: Use Wi-Fi network
login sharing
1
Connect your iPod touch/iPhone/iPad to
your home Wi-Fi network.
2
Connect your iPod/iPhone/iPad to the
main speaker through an Apple USB cable
(not supplied).
Choose method
3 (see 'Method
3: Connect to a
non-WPS Wi-Fi
router' on page 12).
Advertisement
Table of Contents
