Philips DS9800WS User Manual page 17

4
Wait until successful Wi-Fi connection on
your PC/Mac.
Philips_Install XXXXXX
Tip
•
If Philips_Install XXXXXX is not in the list, try to scan
the available Wi-Fi networks again.
Open the built-in web page of
DS9800WS
1
Launch Apple Safari browser or any other
Internet browser on your Wi-Fi enabled
device.
2
Type in 192.168.1.1 at the browser
address bar and confirm.
» The DS9800WS configuration
web page is displayed.
192.168.1.1
Configure the internal Wi-Fi settings
of DS9800WS
On the DS9800WS configuration web page,
you can configure the internal Wi-Fi settings
of DS9800WS for connection of DS9800WS
to your existing home Wi-Fi network.
Note
•
Make sure that the settings on the configuration web
page match your home Wi-Fi network settings that you
wrote on paper.
Philips SoundSphere XXXXXX
EN 15