Ignition Airbase 850 MK2 User Manual page 7

Never use solvents or aggressive cleaning agents for cleaning the device. Use a soft and damp cloth
instead.
Please use the original packing for transporting the device to avoid transport damages. Make sure the
device is packed like it was shipped straight from the factory.
Unauthorized manipulations of the device are forbidden for safety reasons!
A usage of the AIR BASE 850 MK2 which differs from the described one in this manual can result in
damages of the device. In this case the warranty is no longer valid. In addition it is to be considered
that every differing usage is dangerous and can result in e.g. short circuit, fire, electric shock, crashs.
Overhead installation
Danger!
During installation please follow the regulations of the BGV C1 (former VBG 70)
and EN 60598-2-17! Installation may only be carried out by authorized
specialized trade.
AIR BASE 850 MK2's suspension devices have to be build and measured so they can withstand for
an hour the tenfold of the payload without suffering a permanent detrimental deformation.
Basically the installation has to be made by using a second separate suspension. This can be e.g. a
suitable net. The second suspension must be designed and attached so no part of the installation can
fall down in case of failure of the main suspension.
During construction, reconstruction and deconstruction unnecessary stay in the range of moving
areas, on lightning bridges, under elevated work stations or any other danger zones is forbidden.
The entrepreneur is responsible for getting experts to review safety-related and mechanical facilities
before initial start-up or after crucial changes before restarting.
A I R B A S E 8 5 0 M K 2
7 / 15