Ignition Airbase 850 MK2 User Manual page 6

A I R B A S E 8 5 0 M K 2
Make sure that the device is not exposed to extreme heat, humidity or dust at the installation spot.
Make sure that cables do not lie around. This would decrease your own safety and the safety of third
parties.
The device may not be operated or kept in an environment where splashing water, rain, humidity or
fog is expected. Moisture or very high humidity can reduce the isolation of the device and result in
lethal electric shocks. When using fog machines never expose the device directly to the fog stream.
Keep a safety distance of at least 0.5 m between the device and the fog machine. Take care that the
fog saturation enables a good visibility of at least 10 m.
The ambient temperature must be between -5°C and +45°C. Avoid exposing the device to direct rays
of the sun or next to a heating appliance. This also applies for transportation in closed vehicles.
A relative humidity of 50 % at an ambient temperature of 45°C may never be exceeded.
The device may only be operated at a level between - 20 and 2000 meters above sea level.
Do not operate the device during thunderstorms. Overvoltage could destroy the device. Disconnect
the device during thunderstorms completely from the grid by pulling the mains plug.
During installation the use of a mounting bracket is required. To ensure good air circulation, keep a
free space of at least 50 cm around the device.
Surrounding objects or surfaces may not be touched by the housing.
Make sure that during installing and uninstalling of the device the area below the installation spot is
blocked in principle. This also applies for performing service and maintenance.
The device must always be secured by an appropriate safety rope.
Familiarize yourself with the functions of the device before operating it. Do not let inexperienced
persons operate the device. Major cause for malfunctions is an incorrect usage of the device.
6 / 15