Troubleshooting - Electrolux EB6SL80QCN User Manual

12. TROUBLESHOOTING

WARNING!
Refer to Safety chapters.
12.1 What to do if...
Problem
You cannot activate or op‐
erate the oven.
The oven does not heat
up.
The oven does not heat
up.
The oven does not heat
up.
The oven does not heat
up.
The oven does not heat
up.
The oven does not heat
up.
The lamp does not oper‐
ate.
The display prompts to set
the Language.
The display prompts to set
the Language.
The display shows F111.
Possible cause
The oven is not connected
to an electrical supply or it
is connected incorrectly.
The oven is deactivated.
The clock is not set.
The necessary settings are
not set.
The automatic switch-off is
activated.
The door is not closed cor‐
rectly.
The fuse is blown.
The lamp is defective.
There was a power cut lon‐
ger than 3 days.
The demo mode is activa‐
ted.
The plug of the core tem‐
perature sensor is not cor‐
rectly installed into the
socket.
ENGLISH
Remedy
Check if the oven is cor‐
rectly connected to the
electrical supply (refer to
the connection diagram if
available).
Activate the oven.
Set the clock.
Make sure that the settings
are correct.
Refer to "Automatic switch-
off".
Fully close the door.
Make sure that the fuse is
the cause of the malfunc‐
tion. If the fuse is blown
again and again, contact a
qualified electrician.
Replace the lamp.
Refer to "Before first use"
chapter.
Turn off demo mode in:
Menu / Basic Settings /
DEMO. Activation / deacti‐
vation code: 2468.
Put the plug of the core
temperature sensor as far
as possible into the socket.
43