Krups Espresso Automatic EA9000 Series Manual page 30

KRUPS
SERIE EA9000
Fill the cup with the volume of milk indicated on the screen and
n
place it under the coffee spouts.
The cup must be placed close to the cleaning container, under the steam
n
nozzle, at the back of the machine.
However, do not push the frothing nozzle (11) with the cup; otherwise, it
n
might break off.
3
You can lower or raise the coffee nozzle to suit the size of your cup. The
n
steam nozzle will descend just behind the coffee nozzles. Caution: the
maximum height of the cup is defined by the coffee nozzles; do not tilt the
cup to place it under the coffee nozzles.
To use a large cup (or mug), you might have to remove the small drip tray (6).
n
Press the "OK" button.
n
Milk preheating phase.
n
Milk frothing phase:
n
the milk is then frothed
according to the chosen recipe.
4
The nozzle moves up and draws back to return to its cleaning
n
container.
Remove the cup when the screen shows: Your milk is ready.
n
Rinsing the nozzle.
n
5
The nozzle is rinsed automatically. You must wait for this rinsing to be
n
complete before starting the next preparation.
n
Hot water
Press the "Hot water" button on the touch screen.
n
If the machine detects no water when you request this recipe, it will ask
n
you to fill the tank.
1
28