Introduction; How To Obtain Parts; Title Page - Fluke ScopeMeter 123 Service Manual

8.1 Introduction

This chapter contains an illustrated list of replaceable parts for the model 123
ScopeMeter test tool. Parts are listed by assembly; alphabetized by item number or
reference designator. Each assembly is accompanied by an illustration showing the
location of each part and its item number or reference designator. The parts list gives the
following information:
•
Item number or reference designator (for example, "R122")
•
An indication if the part is subject to static discharge: the * symbol
•
Description
•
Ordering code
A * symbol indicates a device that may be damaged by static
discharge.

8.2 How to Obtain Parts

Contact an authorized Fluke service center.
To locate an authorized service center refer to the second page of this manual (back of the

title page).

In the event that the part ordered has been replaced by a new or improved part, the
replacement will be accompanied by an explanatory note and installation instructions, if
necessary.
To ensure prompt delivery of the correct part, include the following information when
you place an order:
•
Instrument model (Fluke 123), 12 digit instrument code (9444 ... ....), and serial
number (DM.......). The items are printed on the type plate on the bottom cover.
•
Ordering code
•
Item number - Reference designator
•
Description
•
Quantity
Caution
List of Replaceable Parts

8.1 Introduction

8
8-3