KitchenAid KSM180RP Series User Manual page 12

USING THE STAND MIXER
Hold the locking lever in the unlock
2
position and tilt motor head back�
To remove accessory: Repeat steps 1
and 2� Press accessory upward
4
as far as possible and turn to the
left� Then pull accessory from the
beater shaft�
12 | USING THE STAND MIXER
W11256121A.indd 12
Slip accessory onto beater shaft and
press upward as far as possible� Then,
3
turn accessory to the right, hooking
accessory over the pin on the shaft�
14/06/2018 15:29:26