Functional principle and features
Main features
Simple installation
100 dB(A) sound pressure
500 m range outdoors
High-performance comfort LEDs
High-performance LED flashing lights
Integrated spirit level
Hinged lid for easy installation
Jamming detection
Before starting installation, identify a suitable installation location for the Wireless
Outdoor Sounder using the wireless test box. Ensure that the sounder is installed
Note
out of hand's reach (minimum 3 m installation height). In addition, the sounder
should be visible and audible from afar.
Incorrect or unclean installation work may lead to erroneous interpretation of sig-
nals. The consequences of which may include false alarms. The costs incurred by
potential dispatches of rescue services, such as the fire service or police, must be
borne by the operator of the system.
To ensure trouble-free operation, the sounder must NOT be installed:
close to large metal structures, such as metal doors or frames, water tanks, vehi-
cles and refrigerators
close to the main power supply, or close to water or gas pipelines
inside a metal housing
next to electronic devices, especially computers, photocopiers and radios.
Switch the Secvest alarm panel to installer mode before starting any installation or
maintenance work. Installer mode prevents the sounder and the flashing light from
Caution
being activated when the sounder's cover is opened. This prevents you being
startled because the sounder remains silent.
26 |
EN
Installer mode (remains silent when opened)
Monitors battery voltage
Cover and wall tamper contact
Selectable off-switch timer
2 different normal alarm sounds can be se-
lected
2 normal alarm tones, 1 fire alarm tone, tone
for perimeter warning, acknowledgement
beep
Shock-resistant construction from polycar-
bonate