Related Manuals for Abus Nexello PLSG10100
Summary of Contents for Abus Nexello PLSG10100
- Page 1 PLSG10100 Nexello Outdoor siren Important notes and FAQs about this product and other products can be found on the website www.abus.com Manual version 1.0 Firmware version 1.01...
- Page 2 ABUS Security Center is limited to the purchase price of the product. The contents of this manual are subject to change without prior notice.
- Page 3 Please ensure that the packaging contains the DSK (Device Specific Key) card. This card shows the DSK of your ABUS Z-Wave device. Please store it in a safe place. Every S2 (Security 2) certified Z-Wave controller needs the DSK to include (teach-in) the device.
- Page 4 English Notes on handling batteries Make sure that batteries are not in the hands of children. Children could put batteries in their mouths and swallow them. This can cause serious damage to health. In this case, consult a doctor immediately! ...
-
Page 5: Table Of Contents
English Table of contents Product ............................. 6 1.1. Scope of delivery ........................6 1.2. Device features ........................6 1.3. Operating principle ........................7 1.4. Performance features ......................7 1.5. Use in systems of different manufacturers ................7 1.6. DSK code ..........................7 Functional overview .......................... -
Page 6: Product
English 1. Product 1.1. Scope of delivery Nexello Outdoor siren 4x GP LR14 C batteries mounting material: screws, dowels Quick guide & safety instructions DSK card 1.2. Device features Designation Comment Siren Siren for alarm tone Status display different... -
Page 7: Operating Principle
English 1.3. Operating principle The device was developed for use in alarm and home automation systems that use the Z-Wave wireless standard. The device has the following functions: Siren Alarm When the unit is activated by the Z-Wave controller, the unit's piezoelectric siren will sound for 3 minutes (default setting) along with the LEDs and flash. -
Page 8: Functional Overview
English 2. Functional overview 2.1. Inclusion / Teach-in device This product supports SmartStart: SmartStart-enabled products can be added to a Z-Wave network by scanning the Z-Wave QR code present on the product with a controller that provides SmartStart integration. No further action is required, and the SmartStart product will be automatically added near the network within 10 minutes of power-up. - Page 9 English Remove the cover over the Link Button and LED indicator by loosening the three screws. Keep the device within range of the Z-Wave controller. Press the Link button 3 times quickly (within 1.5 seconds) to start the inclusion on the device. Successful inclusion is displayed in the app or on the Z-Wave controller and the status LED on the device stops flashing.
-
Page 10: Planning, Assembly And Installation
English 2.2. Planning, assembly and installation The device uses low power radio signals to communicate with the Z-Wave controller. For best results, please note the following: Please do not attach directly to metal planes or metal constructions, as this may limit the range. ... -
Page 11: Exclusion / Teach-In Device
English 2.3. Exclusion / teach-in device Activate the exclusion mode (learn mode) on the Z- Wave controller. (for more details, please refer to the Z-Wave controller's user manual) Or press the "-" button (Remove / Exclusion) in your Z- Wave app and follow the instructions to set the Z-Wave controller to Exclusion mode. -
Page 12: System Status
English 2.5. System status The siren can be informed of various events. These events are distinguished by the LEDs lighting up and the siren behaviour. Event LEDs Siren System was Flashing 2 times briefly Beeps 2 al briefly in one second deactivated System has Lights up for one second... -
Page 13: Advanced Z-Wave Parameters
English 3. Advanced Z-Wave Parameters 3.1. Association Groups Z-Wave devices can control other devices directly. This direct control is called association in Z-Wave. The device ID of the device to be controlled must be stored in the controlling devices. This is done in so-called association groups. -
Page 14: Reports
English 3.3. Reports notification report Attribut Parameters Event Event Type Length Parameters Power is applied for the first time 0x08 0x01 0x00 Power supply unit separated 0x08 0x02 0x00 Power supply unit connected again 0x08 0x03 0x00 Sabotage alarm 0x07 0x03 (Sabotage contact opened after it was closed 0x00... -
Page 15: Overview Configuration Parameters
English 3.4. Overview Configuration Parameters Z-Wave products can be used directly after inclusion in the network. However, configuration settings can be used to adapt the behaviour of the device even better to the requirements of the application and to activate additional functions. Para- Byte Default... -
Page 16: Supported Command Classes
English 3.5. Supported command classes Command class Version Association version 2 Association Group Info Battery Configuration Device Reset Locally Firmware Update MD version 2 Indicator Manufacturer Specific version 2 Multi Channel Association version 2 Notification Version 4 Power level Security Security 2 Supervision Switch Binary... -
Page 17: Technical Data
English 4. Technical data Parameters PLSG10100 Dimensions (H x W x D) 225 x 316 x 95 mm Weight 1283g Operating temperature > -20° – 40°C IP class IP 44 (Protected outdoor area) Radio frequency 868.42 MHz (Z-Wave Plus, Europe) Modulation FSK (BFSK/GFSK) Transmitting power:...
Need help?
Do you have a question about the Nexello PLSG10100 and is the answer not in the manual?
Questions and answers