Table of Contents
Advertisement
the adjacent area are still aligned. Tighten the screws if loose.
NOTE: The rear upper panel and the rear lower panel need to be removed for checking the screws fixing the machine
with the mounting bracket.
5.
Remount the anesthesia machine to the pendant system after service per the installation instructions.
Datex-Ohmeda, Inc.
3030 Ohmeda Drive
PO Box 7550
Madison, WI 53707-7550, USA
This document contains confidential information or proprietary information of General Electric Company or its af-
filiates. Neither the document nor the information therein is to be reproduced, distributed, used, or disclosed, either
in whole or in part, except as specifically authorized in writing by a General Electric Company and must be returned
upon request.
Installation Instructions,
For future reference add to your Technical Reference Manual
M1807013 Rev. F
For Field Use
01 15
Page 5 of 6
Advertisement
Table of Contents
Need help?
Do you have a question about the Carestation 650c and is the answer not in the manual?
Questions and answers