Advertisement
Page 1 of 2
Application Note 0081
How to Pair the PV200 or PV210 with the Survey 200R
The following document is intended to be a troubleshooting guide to ensure you are setting up your Seaward instrument(s) in
the correct manner. Please check all aspects of this before contacting the technical support helpline.
Please register your Seaward product at
• • • •
activate your warranty, receive support and other benefits.
Pairing the Instruments
1)
Before attempting to pair please make sure the batteries in both instruments are good.
2)
Make sure there are no other units operating nearby.
Make sure the PV200 / PV210 and Survey 200R instruments are turned off.
3)
4)
On the Survey 200R, press and hold the "On/Off" keys, keep both keys pressed.
Note:
The Survey 200R will now send the pairing signal (beeping approximately every second).
As soon as the buttons are pressed, and held on the 200R, press and hold the "Riso" and "Mode" keys on
5)
the PV200 / PV210 - keep all buttons pressed.
http://www.seaward.co.uk/userfiles/register-product/select-product.php
to
Rev
1:
30.09.2016
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Seaward PV200
Summary of Contents for Seaward PV200
- Page 1 How to Pair the PV200 or PV210 with the Survey 200R The following document is intended to be a troubleshooting guide to ensure you are setting up your Seaward instrument(s) in the correct manner. Please check all aspects of this before contacting the technical support helpline.
- Page 2 All buttons can now be released. The top line of the PV200 / PV210 will now display the W/m2 icon – this confirms the instruments are paired. The units may be paired but the Survey 200R needs to be placed in the transmit mode.
Need help?
Do you have a question about the PV200 and is the answer not in the manual?
Questions and answers