Removing And Installing Memory Expansion; Removing A Memory Module - Fujitsu LIFEBOOK E549 Operating Manual

Removing and installing components during servicing

Removing and installing memory expansion

System expansion System expansion Memoryremoval Mainmemory Memorymodule
If you are asked by the Hotline/Service Desk to remove or install a memory
expansion module yourself, proceed as follows:
Please observe the safety information in chapter
During installation/removal of memory modules, the battery must remain
removed from the notebook and the notebook must not be connected to the
AC adapter, see
Only use memory modules that have been approved for use in your
notebook (see chapter
Never use force when installing or removing a memory module.
Make sure that no foreign objects fall into the memory upgrade compartment.
You must open the memory upgrade compartment to remove or install a memory
module. On some devices, it is possible that opening the compartment exposes various
components. Only authorized specialists are permitted to remove or change these
components. Therefore, be sure to observe the following:
Individual components can become very hot during operation. Therefore, we
recommend that you wait one hour after switching the notebook off before removing
or installing memory modules. Otherwise, there is a risk of suffering burns!
As some components are exposed that are sensitive to static electricity, please take
note of chapter

Removing a memory module

3
1
68
"Preparing to remove components", Page
"Technical data", Page
"Notes on installing and removing boards and components", Page
2
1
"Important notes", Page
66.
84).
► Carefully push the two mounting
clips outwards (1).
Memory module Memory expansion
The memory module will fold upwards (2).
► Pull the memory module out of its slot
in the direction of the arrow (3).
16.
65.
Fujitsu