Table of Contents
Advertisement
Quick Links
Instruction Manual
www.winegard.com/pathway
For receivers and programming, call 1-866-609-9374
For up-to-date information on receiver compatibility and programming,
visit www.winegard.com/receivers
For help, email help@winegard.com or call 1-800-788-4417
Do not return antenna to place of purchase
2452314
Rev4 5-14
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Winegard Pathway X1
Summary of Contents for Winegard Pathway X1
- Page 1 Instruction Manual www.winegard.com/pathway For receivers and programming, call 1-866-609-9374 For up-to-date information on receiver compatibility and programming, visit www.winegard.com/receivers For help, email help@winegard.com or call 1-800-788-4417 Do not return antenna to place of purchase 2452314 Rev4 5-14...
-
Page 2: Specifications
Handle (“WINEGARD” facing up) Compatible Receivers The Pathway X1 antenna must be used with DISH Solo HD receivers. Examples of DISH Solo HD receivers include DISH 211z, 211k, 211, and 411 receivers. *Source: www.satbeams.com. Coverage maps are approximate and do not guarantee coverage. - Page 3 50 feet. water may damage the electronics. Select a location that will enable the Pathway X1 antenna to Do not install or operate the antenna in winds of 35 mph or sit within three degrees of level. The antenna may take longer greater.
- Page 4 “Receiver Setup for Currently Active or Previously Used Receivers.” Receiver Setup for New Receivers If using a new receiver with the Pathway X1 antenna, the receiver will go through an Installation Wizard to help with the setup process. Follow the on-screen instructions to program the remote control.
- Page 5 For optimal performance, update receiver software occasionally. To allow the software to update, leave the satellite If the receiver you will be using with the Pathway X1 antenna on signal, and press the Power button on the remote or front is an older receiver that has not been used in several years, panel of the receiver;...
- Page 6 Receiver Setup for a Secondary Receiver Select “Test” (see fig. 14). The receiver will then run through a series of tests to install the proper satellite. The Check Switch test will install the satellite that the primary receiver is After completing setup on the main receiver, power on the receiving signal from.
-
Page 7: Troubleshooting
• Attempt a re-scan on the receiver. If the above steps do not resolve the error, re-boot the receiver and start the Mobile Antenna Setup again; often, this will resolve the problem. If the problem persists, contact Winegard Technical Services at help@winegard.com or 1-800-788-4417. - Page 8 Customer must provide proof of purchase to verify the product is under warranty. If the product is brought to an authorized Winegard dealer for service prior to expiration of year one (1) of the warranty period and a defect in material or workmanship is verified by Winegard Technical Services, Winegard Company will cover the Winegard dealer’s labor charges...
Need help?
Do you have a question about the Pathway X1 and is the answer not in the manual?
Questions and answers
WHICH SIDE OF THE ANTENS SHOULD FACE SOUTH?