Reece Milli Pure Manual

Vertical single heated towel rail 900x38 chrome

Advertisement

MILLI PURE VERTICAL SINGLE HEATED
TOWEL RAIL 900X38 - CHROME

SPECIFICATIONS

Recommended use
Material
Electrical Connection
Power Entry
Heating Method
Wattage
IP Rating
Standard
Robe Hook

CLEANING RECOMMENDATIONS

We recommend the use of a soft dry cloth.
This product should not be cleaned with abrasive materials or cleaning agents.
Damage caused by improper treatment is not covered by the product warranty - refer
to warranty conditions.
Disclaimer: Products in this specification manual must by regulation be installed by licensed and registered trade people. The manufacturer/
distributor reserves the right to vary specifications or delete models from their range without prior notification. Dimensions are nominal
measurements only. Dimensions and set-outs listed are correct at time of publication however the manufacturer/distributor takes no responsibility
for printing errors.
Tech Page Version 1
38ø
Domestic, hotel and commercial
Copper Tube with Brass fittings
Hardwired only
Through wall bracket - Bottom Only
Water Filled
30 watts
IPX5
AS/NZS: 3350
Sold seperately
Dimensions are nominal measurements only.
To see the complete MILLI range go to
www.reece.com.au/bathrooms
page 1 of 5

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Milli Pure and is the answer not in the manual?

Questions and answers

Summary of Contents for Reece Milli Pure

  • Page 1 1 of 5 MILLI PURE VERTICAL SINGLE HEATED TOWEL RAIL 900X38 - CHROME 38ø Dimensions are nominal measurements only. SPECIFICATIONS Recommended use Domestic, hotel and commercial To see the complete MILLI range go to Material Copper Tube with Brass fittings www.reece.com.au/bathrooms...
  • Page 2 2 of 5 MILLI PURE VERTICAL SINGLE HEATED TOWEL RAIL 900X38 - CHROME WARNING This product must be installed by a qualified electrician in accordance with AS/NZS 3000 wiring rules. Switch off the electrical supply at the mains before installation and maintenance. A means of disconnection must be incorporated in the fixed wiring in accordance with the wiring rules.
  • Page 3 3 of 5 MILLI PURE VERTICAL SINGLE HEATED TOWEL RAIL 900X38 - CHROME Fig 1. Fig 2. Screw Brass Bracket Insert - Close Up 8mm Wide Channel 30 mm 22mm Screw Cord Hold Towel Rail in desired position against wall, with a pencil draw an outline around both bracket arms.
  • Page 4 4 of 5 MILLI PURE VERTICAL SINGLE HEATED TOWEL RAIL 900X38 - CHROME REPLACING ELEMENT Replacing an old element is a very simple process. All electrical wiring must be carried out by a licensed electrician. There are Six Basic Steps: You will need to obtain a 22mm tap spanner.
  • Page 5 5 of 5 MILLI PURE VERTICAL SINGLE HEATED TOWEL RAIL 900X38 - CHROME HARD WIRING Hydrotherm recommends that all hard-wired heated towel rails be connected to a light switch or timer. Connecting hard-wired heated towel rails to a light switch or timer will prolong the life of the electric element and reduce energy consumption.

This manual is also suitable for:

Milli

Table of Contents