Advertisement
Quick Links
MILLI
CUBE HEATED TOWEL RAIL
1025 X 850
1025
820
850
SPECIFICATIONS
Recommended Use
Colour
Materials
Finish
Technology
Element
Options
Power Entry
Wattage
Standards
Safety Rating
CLEANING RECOMMENDATIONS
We recommend the use of soapy water or approved cleaners.
This product should not be cleaned with abrasive materials.
Damage caused by any improper treatment is not covered by the product
warranty. Refer to Warranty Conditions on the last page.
Disclaimer: Products in this specification manual must by regulation be installed by licensed and registered trade
people. The manufacturer/distributor reserves the right to vary specifications or delete models from their range
without prior notification. Dimensions are nominal measurements only. Dimensions and set-outs listed are correct at
time of publication however the manufacturer/distributor takes no responsibility for printing errors.
Tech Page Version 1
120
825
Residential and Commercial
304 Stainless Steel
Stainless Steel
Polished Stainless Steel
Dry Element
Electrical Element
Hardwired Only
Bottom Right
140W
AS/NZ 60335
IP 45
To see the complete Milli range go to
www.reece.com.au/bathrooms
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Reece Milli CUBE HEATED TOWEL RAIL 1025 X 850
Summary of Contents for Reece Milli CUBE HEATED TOWEL RAIL 1025 X 850
- Page 1 Refer to Warranty Conditions on the last page. To see the complete Milli range go to www.reece.com.au/bathrooms Disclaimer: Products in this specification manual must by regulation be installed by licensed and registered trade people. The manufacturer/distributor reserves the right to vary specifications or delete models from their range without prior notification.
-
Page 2: Specifications
WARANTY & CARE DETAILS: Dear Customer, This is the warranty by Reece Pty Ltd. relating to this product. Please keep it together with your purchase receipt. In the unlikely event of a query please contact your nearest Reece Plumbing Centre. - Page 3 MILLI CUBE HEATED TOWEL RAIL 1025 X 850 INSTALLATION OF MILLI LADDER TOWEL WARMER This Package Contains: 1 Ladder Towel Warmer and flex 4 Mounting Feet with Mounting Barrel & Grub Screw (with 2 pin plug Australian models only) 4 Mounting Screws to fix Brass mounting Barrel to wall 1 Brass Concealed adaptor (optional) 3 Fixing screws to attach feet to towel warmer CAUTION: Prior to installation please ensure the product is to your satisfaction.
- Page 4 MILLI CUBE HEATED TOWEL RAIL 1025 X 850 Concealed Wiring Option: It is recommended that the concealed wiring adaptor be installed before the wall cladding is in position. Cut plug from end of electrical flex (if applicable) Carefully remove the stainless steel leg from the flex Thread the flex through the centre of the stainless steel foot Connection to electrical supply should be carried out by a qualified electrician in accordance with local electrical requirements and regulations and to ensure the electrical supply, plug &...
- Page 5 You have purchased a quality product from Reece Pty Ltd This warranty does not include faults caused by: ABN 84 004 097 090 (“Reece”). This product is covered by a • Unsuitable or improper use 7 year replacement product warranty and a 12 month warranty •...
Need help?
Do you have a question about the Milli CUBE HEATED TOWEL RAIL 1025 X 850 and is the answer not in the manual?
Questions and answers