Reece Mizu Drift Series Installation Instructions

Polished stainless steel heated towel rail

Advertisement

WARNING

This product must be installed by a qualified electrician in accordance with AS/NZS 3000 wiring rules. Switch off the electrical
supply at the mains before installation and maintenance. A means of disconnection must be incorporated in the fixed wiring
in accordance with the wiring rules. For complete temperature control a wall mounted dimmer switch (with "off" position) is
recommended. Suitable for bathroom and non-bathroom/dry areas. Not suitable for above baths, nor for installation in saunas,
steam rooms or shower cubicles. Please consult with a qualified electrician to confirm appropriate compliant installation
location.
Do not connect to a plug and socket outlet. Rated IP45 and suitable for indoor use only. Do not fix to damp or conductive
surfaces. Site well away from curtains and fabrics. Switch off after use.
This appliance is not to be used by persons (including children) with reduced physical, sensory or mental capabilities, or lack
of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a
person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.
WARNING: In order to avoid a hazard for very young children, this appliance should be installed so that the lowest heated rail
is at least 600mm above the floor.
For safety, please DO NOT use for any purpose other than as a towel rail and a towel warmer. To avoid damage DO NOT sit,
stand, lean or hang on product.
Electrician, please ensure a copy of the installation
instructions is left with the end user for future reference.
Mizu Drift Heated Towel Rail
Polished Stainless Steel
Page 1 of 4

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Mizu Drift Series and is the answer not in the manual?

Questions and answers

Summary of Contents for Reece Mizu Drift Series

  • Page 1 Installation Instructions Mizu Drift Heated Towel Rail Polished Stainless Steel WARNING This product must be installed by a qualified electrician in accordance with AS/NZS 3000 wiring rules. Switch off the electrical supply at the mains before installation and maintenance. A means of disconnection must be incorporated in the fixed wiring in accordance with the wiring rules.
  • Page 2 Installation Instructions Mizu Drift Heated Towel Rail Polished Stainless Steel INSTALLATION INSTRUCTIONS Please consult with a qualified electrician to confirm appropriate compliant installation location. DIAGRAM 1 Rail Point Height & Width Fixing Point 850mm x 550mm 828mm x 528mm 850mm x 760mm 828mm x 738mm 1050mm x 550mm 1028mm x 528mm...
  • Page 3 Installation Instructions Mizu Drift Heated Towel Rail Polished Stainless Steel • Connect the power cord to the power supply. • With the allen key provided, tighten the grub screws to ensure that towel rail stays in position. Electrician, please ensure a copy of the installation instructions is left with the end user for future reference.
  • Page 4 Operation and Maintenance Mizu Drift Heated Towel Rail Polished Stainless Steel OPERATION AND MAINTENANCE • After installation, connect the electric power and turn on the wall switch. The towel warmer will start to work • Turn off the wall switch when towel warmer is not in use. The towel warmer will stop working •...

Table of Contents

Save PDF