Apm; Pci Subsystem Settings - Asus Pro WS 621-64L SAGE Series Manual

The following item appears only when you set Intel LAN2 Enable to [Enabled].
Intel LAN2 ROM Type
Allows you to select the Intel LAN ROM type.
Configuration options: [Disabled] [PXE] [iSCSI]
Onboard X550 LAN Configuration (Pro WS C621-64L SAGE/10G only)
Intel LAN1 & LAN2 Enable
Allows you to enable or disable the Intel LAN.
Configuration options: [Disabled] [Enabled]
The following item appears only when you set Intel LAN1 & LAN2 Enable to [Enabled].
Intel LAN1 ROM Type
Allows you to select the Intel LAN ROM type.
Configuration options: [Disabled] [PXE]
Intel LAN2 ROM Type
Allows you to select the Intel LAN ROM type.
Configuration options: [Disabled] [PXE]
3.6.8

APM

Allows you to configure the Advance Power Management (APM) settings.
Restore AC Power Loss
When set to [Power Off], the system goes into off state after an AC power loss. When set
to [Power On], the system will reboot after an AC power loss. When set to [Last State], the
system goes into either off or on state, whatever the system state was before the AC power
loss.
Configuration options: [Power Off] [Power On] [Last State]
Power On By PCIE
[Disabled]
[Enabled]
Power On By RTC
[Disabled]
[Enabled]
3.6.9

PCI Subsystem Settings

Allows you to configure PCI, PCI-X, and PCI Express Settings.
Load RT32 Image
Allows you to enable or disable RT32 Image Loading.
Configuration options: [Disabled] [Enabled]
3-12
Disables the PCIE devices to generate a wake event.
Enables the PCIE devices to generate a wake event.
Disables RTC to generate a wake event.
W hen set to [Enabled], the items RTC Alarm Date (Days) and
Hour/Minute/Second will become user-configurable with set values.
Chapter 3: BIOS Setup