Table of Contents
Advertisement
4.4.1
Creating a RAID set
To create a RAID set:
1.
From the Intel
<Enter>. The following screen appears:
2.
When the Name item is selected, enter a name for the RAID set and press <Enter>.
3.
When the RAID Level item is selected, press <Enter> to select the RAID level to
create, and then press <Enter>.
4.
When the Enable RAID spanned over VMD Controllers item is selected, press
<Enter> and select X to enable this function.
5.
Under Select Disks, press <Enter> and select X for the disks you want to include in
the RAID set.
6.
When the Strip Size item is selected, press <Enter> to select strip size for the RAID
array (for RAID 0, 10 and 5 only), and then press <Enter>. The available strip size
values range from 4 KB to 128 KB. The following are typical values:
-
RAID 0: 128 KB
-
RAID 10: 64 KB
-
RAID 5: 64 KB
We recommend a lower strip size for server systems, and a higher strip size for
multimedia computer systems used mainly for audio and video editing.
4-18
Virtual Raid on CPU menu, select Create RAID Volume and press
®
Chapter 4: RAID Configurations
Hide quick links:
Advertisement
Table of Contents
