Installing Three Crossfirex™ Graphics Cards - Asus Pro WS 621-64L SAGE Series Manual

5. Connect two independent auxiliary
power sources from the power supply
to the two graphics cards separately.
6. Connect a VGA or a DVI cable to the
graphics card.
5.1.4 Installing three CrossFireX™ graphics cards
To install three CrossFireX™ graphics cards:
1. Prepare three CrossFireX™-ready graphics cards.
2. Insert the three graphics card into the PCIEX16 slots. If your motherboard has more
than three PCIEX16 slots, refer to Chapter 1 in this user manual for the locations of
the PCIEX16 slots recommended for multi-graphics card installation.
3. Ensure that the cards are properly
seated on the slots.
4. Align and firmly insert the two
CrossFireX™ bridge connectors to
the goldfingers on each graphics
card. Ensure that the connectors are
firmly in place.
5. Connect three independent auxiliary
power sources from the power
supply to the three graphics cards
separately.
6. Connect a VGA or a DVI cable to the
graphics card.
ASUS Pro WS C621-64L SAGE Series
5-3