8.
VGA Controller jumper (Pro WS C621-64L SAGE/10G only)
The VGA Controller jumper allows you to enable or disable the onboard VGA
controller. Set to pins 1-2 to enable the onboard VGA.
Ensure the ATX power supply is switched off or the power cord is detached from the
power supply when enabling or disabling the VGA controller settings using this jumper.
•
•
1-14
If a VGA Card is installed into a PCI Express x16 Slot, the onboard VGA function will
still be enabled.
BMC Remote Management Function will still be available when VGA controller
settings is set to disabled, but the display will be disabled on the client device.
Chapter 1: Product Introduction