Creating A Raid Set - Asus Pro WS 621-64L SAGE Series Manual

4.2.1

Creating a RAID set

To create a RAID set:
1. From the utility main menu, select 1. Create RAID Volume and press <Enter>.
2. Key in a name for the RAID set and press <Enter>.
Intel(R) Rapid Storage Technology enterprise - SATA Option ROM - 3.6.0.1023
Copyright(C) 2003-12 Intel Corporation.
Enter a unique volume name that has no special characters and is
[ ]Change
3. Press the up/down arrow keys to select a RAID Level that you wish to create then
press <Enter>.
4. From the Disks item field, press <Enter> to select the hard disk drives that you want
to include in the RAID set.
Port Drive Model
0 ST3300656SS
1 ST3300656SS
2 ST3300656SS
3 ST3300656SS
Select 1 Master and 1 Recovery disk to create volume.
[ ]-Prev/Next [TAB]-(M)aster [SPACE]-(R)ecovery [ENTER]-Done
5. Use the up/down arrow keys to move the selection bar then press <Space> to select a
disk. A small triangle before the Port number marks the selected drive. Press <Enter>
when you are done.
4-4
[ CREATE VOLUME MENU
Name: Volume0
RAID Level: RAID0(Strips)
Disks: Select Disks
Strip Size: 128KB
Capacity: 0.0 GB
Syne: N/A
Create Volume
[ HELP ]
16 characters or less.
[TAB]-Next [ESC]-Previous Menu
[ SELECT DISKS ]
Serial #
HWAS0000991753TR 279.3GB
37VN00009846RAJ1 279.3GB
397600009846UEDY 279.3GB
GWC50000991756G6 279.3GB
All Rights Reserved.
]
[ENTER]-Select
Size Status
Non-RAID Disk
Non-RAID Disk
Non-RAID Disk
Non-RAID Disk
Chapter 4: RAID Configurations