Erasing Parts Of The Copy Image (Erase); Erasing The Surrounding Area Of The Original Image (Erase Border); Erasing The Center Margin Of The Original Image (Erase Center) - Ricoh FT9105 Operating Instructions Manual

ERASING PARTS OF THE COPY IMAGE
Erasing The Surrounding Area Of The Original
Image (Erase Border)
Erasing The Center Margin Of The Original Image
(Erase Center)
You can change default center and margin widths selected by the [Erase Cen-
ter/Border] key with the user tools.
The width of the margin to be erased can be set as follows:
Erase Border
Erase Center
Metric version:
Inch version:
Metric version:
0 ~ 32 mm in 5 mm steps from 7 ~ 32 mm
Inch version:
0 ~ 1.2" in 0.2" steps

ERASING PARTS OF THE COPY IMAGE (ERASE)

See page 120.
2.5 ~ 20 mm in 2.5 mm steps
0.1" ~ 0.8" in 0.1" steps
(ERASE)
85