Mounting The Wire Guide - Abicor Binzel ABIMIG 0 Series Operating Instructions Manual

5 Putting into operation
1 Transition piece
2 Counter nut
Fig. 1 Equipping the torch ABIMIG
1 Transition piece
2 Tip adaptor
Fig. 2 Equipping the torchABIMIG

5.2 Mounting the wire guide

EN - 10
Wear parts for ABIMIG
5 4
3 Tip adaptor
4 Contact tip
NOTICE
• The counter nut and the tip adaptor are attached to the torch neck by
means of a left-handed thread.
• The left-handed thread is marked at the tip adapter, at the counter nut
and at the torch neck with a groove.
• During mounting screw the tip adapter tightly against the torch neck.
Then screw the counter nut tightly against the tip adaptor, in order to
secure a tight connection.
Wear parts for ABIMIG
4 3
NOTICE
• The tip adapter is fastened to the torch neck by means of a right-handed
thread.
• During mounting screw the tip adapter tightly against the torch neck.
NOTICE
• Only use gas-tight, plastic-insulated wire guides to ensure a secure
shielding gas cover and a defined current contact.
• Bare liners give rise to a loss of shielding gas.
®
XX0
3 2
®
XX0
®
XX5/XX7
2
3 Contact tip
4 Gas nozzle
®
XX5/XX7
®
ABIMIG XX0/XX5
1
5 Gas nozzle
1