Resistance Measurement - UNI-T UT30A Operating Manual

Model UT30A: OPERATING MANUAL
Measurement Operation (7)
E. Resistance Measurement (figure 6)
Warning
To avoid damages to the Meter, when measuring resistance, cut off the power
of the object and no charge in capacitor.
1) Measuring value inputs from "VΩ
jack (red test leads) and "COM"
jack (black test leads).
2) Wires takes 0.1Ω - 0.3Ω tolerance
at function of 400Ω, when
measuring resistance. To get
an accurate reading, you can
subtract the short circuit values
of the 2 test leads.
mA
"
(figure 6)
17
black red