Preparing And Executing A Color; Measurement Job - Epson SpectroProofer Mounter 24 User Manual

SpectroProofer Mounter 24"/44"
Preparing and executing a
color measurement job
This section introduces the color measuring
procedures using Preparing and executing a
color measurement job.
See the online help for detailed information.
A
Turn on the printer. Make sure the printer
and this product are both in the ready state.
Make the initial settings when you use this
product for the first time.
See "Making Initial Settings" on page 10
Perform maintenance if necessary.
See "Cleaning the Associate Parts for
ILS20EP/ILS20EPUV" on page 13
B
Set the paper in the printer.
See the SpectroProofer Utilities online help
for the supported media.
Please refer to the User's Guide of the printer
when you set the paper.
C
Start the SpectroProofer Utilities.
See "Starting SpectroProofer Utilities"
on page 11
D
Click Preparing and executing a color

measurement job.

User's Guide
How To Use
E
Select the job you want to perform.
Follow the wizard to complete the settings.
Click the Help button to see the online help
for detailed information.
12
Note:
The ICC profile cannot be created by the
SpectroProofer Utilities alone. You need a
creation software separately.