Matching The Print Results To The Displayed Color Of Print Data - Epson ONYX RIP Manual

Epson Manual for RIP Printing (ONYX RIP)
D
Click in Placement on the right side of the screen.
E
Select Flip every other tile and click OK.
After doing that, specify the quick set to use for printing, and then print.
Matching the Print Results to the Displayed Color of
Print Data
You need to match the settings of an image processing software (Adobe Photoshop, Adobe Illustrator, etc.) to those of
the RIP profile to print the print data in the colors you expect. Do the setting with a method, according to your purpose,
from below.
Note:
We recommend doing monitor matching (color management for the screen) for the print color to be as close as possible to the
colors displayed on the computer screen. See the manuals for your computer and monitor for details.
Checking the print results with a wide color gamut profile in advance on the screen
You can print in a wider color gamut than typical print colors by using the wide color gamut profile
(EpsonWideCMYK_Ver2.icc) that Epson provides. We recommend these when you want to do brightly colored
printing, such as for signs. Do the following settings to check the print results before printing.
Troubleshooting
37