Fault Solution - WilTec 61542 Operation Manual

Fault Solution

Fault
1. Check whether the power plug is firmly in-
serted in the socket or not.
2. Check whether the power switch of the
Motor has fault
cleaner is turned on or not.
of rotation
3. Check whether a small plug on the hose is
inserted in the socket above the machine head
or not. Turn on the power switch on the hose
handle (only for the manual control type).
1. Check whether the nozzle, hose and con-
necting pipe are blocked or not.
2. Check whether the dirt and dust bag is full or
not.
Suction is 3. Check whether the filter sponge and bag are
weakened blocked or not.
4. Check whether the connecting pipe is con-
nected well or not.
5. Check whether the handle air volume switch
is fully turned on or not.
© by WilTec Wildanger Technik GmbH
http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de
Possible Cause Treatment method
Insert the plug in the socket
again and guarantee the power
socket to be on.
Turn on the power switch.
Insert the small plug and turn
on the power switch on the
hose handle.
Remove blockage in time.
Discard dirt and dust.
Wash the filter sponge and bag.
Install the connecting pipe
again.
Turn off the air volume switch
button.
Seite 17