Advertisement
Introduction to Operation of Automatic Type
Main components of automatic type
1) Check whether the machine package is damaged or not after receiving the product, then open and
take out the machine, and assemble as shown in the figure.
2) Please note, check two ends of the pipe while assemble the water outlet pipe, and connect the
side without a rubber sheet inside with the complete machine.
3) The connecting mode of automatic control suction pipe is as shown in figure 1.
4) The bag assembly mode and position are as shown in figure 2.
5) The filter sponge assembly mode and position are as shown in figure 4.
6) Press the switch button, extend the hose and hand nozzle to the pool for suction.
7) After finishing suction, turn off the power switch, and pull out the plug. Dismantle the connecting
pipe and hose, and place the flat suction and hand nozzle on the accessory socket of the machine
head as shown in figure 3.
8) Wash the bag and filter sponge with water while cleaning the complete machine.
© by WilTec Wildanger Technik GmbH
http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de
Seite 16
Advertisement
