Remote Control; Disposal; Maintenance And Cleaning - VOLTCRAFT NPI Series Operating Instructions Manual

7. REMOTE CONTROL

The NPI series inverters are equipped with a remote control function.
Connect a wire cable (min. 0.5 mm
12V. The cable length may be up to 10 m.
Now switch the operating switch (1) on the inverter to "Remote". Now you can turn the inverter, which is
connected to the socket "Remote" (2), on and off.

8. DISPOSAL

Used electronic devices are raw materials and must not be disposed of in the domestic
waste. When the device has become unusable, dispose of it in accordance with the cur-
rent statutory regulations at the communal collection points. Disposal in the household
waste is prohibited.

9. MAINTENANCE AND CLEANING

Apart from an occasional cleaning or exchanging the fuse, the inverters are maintenance-free.
Switch the device off during maintenance work. Separate it from the supply voltage
and the connected end devices if you do not use the inverter for longer periods.
Use a clean, lint-free, antistatic and dry cloth to clean the device. Do not use any abra-
sive or chemical agents or detergents containing solvents.
Regularly check the connection clamps to ensure the connection is still tight and
secure.
24
cable diameter) to the socket "Remote" (2) with a switch suited for
2