Panasonic AW-HE130WP Operating Instructions Manual page 57

Specifications (continued)
Chroma amount variability:
OFF, -99 % to 40 %
Scene file: S cene1, Scene2, Scene3, Scene4
Output format: 1 080/59.94p, 1080/29.97p
1080/59.94i, 1080/29.97PsF, 1080/23.98PsF,
720/59.94p, 480/59.94p(i)
1080/50i, 1080/25PsF, 720/50p, 576/50p(i)
*
1
Native output
*
2
A 'P' signal is output as HDMI output, an 'I' signal
is output as SDI and an analog output for output
formats of 480/59.94p(i) and 576/50p(i).
Synchronization system:
Internal/External synchronization (BBS/Tri-level sync)
[Pan-tilt head unit]
Installation method:
Stand-alone (Desktop) or suspended (Hanging)
• To ensure safety, the unit must be secured using
the mount bracket supplied.
Camera/pan-tilt head control:
IP connecting • When connecting through a hub: LAN
cable cable
cable), max. 100 m (328 ft)
• When a hub is not used: LAN cable
(category 5 or above, crossover cable) max.
100 m (328 ft)
RP connecting LAN cable
cable cable), max. 1000 m (3280 ft)
RS-422A, AW series protocol
*
2 Use of an STP (shielded twisted pair) cable is recommended.
Pan/tilt operation speed:
0.08°/s to 60°/s
Panning range: ±175°
Tilting range: –30° to 210°
• Depending on the pan or tilt position, the camera
may be reflected in the image.
Quietness: NC35 or less
, 1080/23.98p,
* 1
, 1080/50p, 1080/25p
* 2 *
2
*
(category 5e or above, straight
2
*
2
*
(category 5 or above, straight
2
*
AC adaptor
„
Input : A C 100 - 240 V, 1.2 - 0.6 A
50/60 Hz
Output : D C 12 V, 2.0 A, 24 W
indicates safety information.
,
1
Inrush current, measured according to European standard EN55103-
1, on initial switch-on: 4A, after a supply interruption of 5 s: 13 A
57