Panasonic AW-HE130WP Operating Instructions Manual page 43

Parts and their functions (continued)
<NOTE>
• To prevent malfunctioning, there are a number of menu items
([Scene], [Format], [Down CONV. Mode] and [Frequency]) whose
setting is not reflected immediately even if it is changed while it is
still flashing.
It is reflected only after the <M> button has been pressed, causing
the setting to stop flashing and the new setting to be entered.
• A confirmation screen appears before the settings of some menu
items are to be entered.
11.
F OCUS button <F> <N>
These are used to adjust the lens focus manually when the manual
setting is established for the lens focus.
The focus is adjusted in the far using the <F> button and in the near
using the <N> button.
12.
A /FOCUS button <A/FOCUS>
This is used when automatically adjusting the lens focus.
13.
M /FOCUS button <M/FOCUS>
This is used when manually adjusting the lens focus.
The FOCUS buttons (<F> and <N>) are used when performing the
actual adjustment.
14.
O PT button <ON> <OFF>
Turn night mode on/off.
<NOTE>
• In night mode, video output will be in black and white. In addition,
the iris will be forcibly opened.
• White balance adjustment is not possible in night mode.
• ND filter switching is not possible in night mode.
15.
H OME button <HOME>
When this is pressed for 2 seconds, the unit's direction (panning or
tilting) returns to the reference position.
16.
Z OOM button <T> <W>
These are used to adjust the lens zoom.
The zoom is adjusted in the wide-angle using the <W> button and in
the telephoto using the <T> button.
17. F AST button <FAST>
This is used to change the movement speed at which the panning,
tilting, zooming and focusing operations are performed to the high
speed.
<NOTE>
• The operating speed for panning and tilting when the preset
memory settings have been called can be changed using the
"Preset Speed" item of the camera menu.
18.
S LOW button <SLOW>
This is used to change the movement speed at which the panning,
tilting, zooming and focusing operations are performed to the low
speed.
19.
A /IRIS button <A/IRIS>
This establishes the setting for adjusting the lens iris automatically in
line with the light quantity.
20. M /IRIS button <M/IRIS>
This establishes the setting for adjusting the lens iris manually.
The <IRIS +> and <IRIS –> buttons are used when performing the
actual adjustment.
21.
I RIS + buuton <IRIS +>
This is used to adjust the lens iris in the opening direction.
22.
I RIS - button <IRIS ->
This is used to adjust the lens iris in the closing direction.
43