Wireless Remote Control (Not Supplied) - Panasonic AW-HE130WP Operating Instructions Manual

Parts and their functions (continued)
Wireless remote control (not supplied)
2
1
4
5
6
7
8
9
10
11
18
12
13
1.
ON/STANDBY button <ON/STANDBY>
Each time this is pressed for 2 seconds, operation switches between
turning on the unit's power and establishing the standby status.
2.
Signal transmission window
3.
MENU button <MENU>
Each time this is pressed for 2 seconds, operation switches between
displaying the unit's camera menu and exiting the camera menu.
When it is pressed quickly (for less than 2 seconds) while a camera
menu is displayed, the setting change is canceled.
Furthermore, the pan and tilt movement range limits (limiters) are set
and released by operating the <PRESET/LIMIT> button and the pan/
tilt buttons (<4> <5> <b> <a>).
For details, refer to "Setting/releasing the limiters" (→ PDF page 110).
4.
CAM1 to CAM4 buttons
<CAM1> <CAM2> <CAM3> <CAM4>
Selects a camera to be operated.
Once a button has been selected, the unit corresponding to the
selected button can be operated.
5. SET button <SET>
If this button is held down for 2 seconds when the AWB A memory or
AWB B memory has been selected for the white balance adjustment,
the black balance and white balance are adjusted automatically and
registered in the memory selected.
When this button is pressed for under 2 seconds, only the white
balance is adjusted automatically.
42
6.
MODE button <MODE>
This is used to select the video signals which are output from the unit.
Each time it is pressed, the signals are switched between the color
bar signals and camera video signals.
<NOTE>
3
• The setting for the [Down CONV. Mode] item when color bars are
displayed is fixed at [Squeeze].
• When [Audio] is set to [On] and the color bar is displayed, a test
14
sound (1 kHz) is output. Be cautious of the volume on external
devices.
7.
GAIN button <OFF> <LOW> <HI> <AUTO>
These are used to set the gain.
The gain increase can be set in three steps using the <OFF>, <LOW>
and <HI> buttons.
<LOW> is set to 9 dB, and <HI> is set to 18 dB.
When the <AUTO> button is pressed, the AGC function is activated,
and the gain is adjusted automatically depending on the light quantity.
The maximum gain of the AGC function can be set using the camera
menu.
15
8.
Preset memory call buttons <1> to <12>
These are used to call the information on the unit's directions and
other settings, which have been registered in the unit's preset
memories No.1 to No.12, and reproduce those settings.
Settings in preset memories No.13 and above cannot be called from
the wireless remote control.
9.
PRESET/LIMIT button <PRESET/LIMIT>
16
This is used to register the settings in the preset memories or set or
release the limiters.
When a preset memory call button is pressed while the <PRESET/
17
LIMIT> button is held down, the information on the unit's current
21
direction and other settings is registered in the call button.
19
Preset memory call buttons <1> to <12> correspond to the unit's No.1
22
to No.12 preset memories.
20
Furthermore, the pan and tilt movement range limits (limiters) are set
and released by operating the <PRESET/LIMIT> button, <MENU>
button and the pan/tilt buttons (<4> <5> <b> <a>).
For details, refer to "Setting/releasing the limiters" (→ PDF page 110).
10.
P an-tilt buttons and menu operation buttons
<4> <5> <b> <a> <M>
1) T hese are used to change the unit's direction.
The unit is tilted in the up/down direction using the <4> and <5>
buttons and panned in the left/right direction using the <b> and
<a> buttons.
The <M> button does not work during tilting and panning.
When the <4> or <5> and <b> or <a> buttons are pressed at the
same time, the unit moves diagonally.
2) T he buttons are used for menu operations when the unit displays
the camera menus.
Use the <4> , <5> (<b>, <a>) buttons to select the menu items.
When a selected item has a sub-menu, the sub-menu will be
displayed by pressing the <M> button.
When the cursor is aligned with a particular item and the <M>
button is pressed on the setting menu at the bottom hierarchical
level, the setting of the selected item blinks.
When the <M> button is pressed after the setting has been
changed using the <4> and <5> (<b> and <a>) buttons, the
setting stops blinking, and the new setting is entered.
A setting for a regular menu item is reflected immediately if it is
changed while it is still flashing.
If the <MENU> button is pressed quickly (for less than 2 seconds)
while the setting is in the blinking status, the change will be
canceled, and the setting selected prior to the change will be
restored.