RTI KA11 Reference Manual

11" touchpanel controller

Table of Contents

Download this manual

KA11 Touchpanel

The KA11 touch panel is the ultimate choice for simple, intuitive control of the entertainment, environment and security

systems in residential or commercial facilities. It features a fully customizable 11.6" widescreen LCD display with

1920x1080 FHD resolution and integrated capacitive touchscreen. The sleek touchpanel is easily wall mounted or an

accessory stand is available for table top installations. The ambient light and proximity sensors automatically adjust the

screen brightness and LED backlight according to the environmental light level.* Built-in gigabit Ethernet with PoE enables

powerful two-way control via the RTI control system, video from IP security cameras, video intercom functionality,* and

remote programming updates.

The KA11 provides superior quality and reliability as well as these features:

• 11.6" widescreen LCD with 1920x1080 FHD resolution and integrated capacitive touchscreen for fast touch response.

• Fully customizable display for simple, intuitive control.

• Innovative design allows wall mount or table top installation using stand accessory (sold separately).

• Ambient light and proximity sensor adjusts the screen brightness and LED backlights automatically according to the

environmental light level (* Requires firmware update).

• Powered by PoE (Power over Ethernet) or a power supply (sold separately).

• Gigabit Ethernet with PoE enables two-way control via the RTI control system, video from IP security cameras, and remote

programming updates.

• Built in camera, microphone and speakers enable video intercom (* Future firmware update).

KA11

11" Touchpanel Controller

Reference Guide

Table of Contents

Need help?

Do you have a question about the KA11 and is the answer not in the manual?

Page 1 (* Requires firmware update). • Powered by PoE (Power over Ethernet) or a power supply (sold separately). • Gigabit Ethernet with PoE enables two-way control via the RTI control system, video from IP security cameras, and remote programming updates.
Page 2 POWERING THE KA11 The KA11 is designed to be powered over an Ethernet connection with PoE or by connecting a 24v power supply (not included), but not both. If both the PoE and a 24v power supply are connected, the KA11 will draw power from the 24v source.
Page 3 Loosen the captive screws of the unit to the level indicated by the lines in the diagram. Screws should not be removed from the unit. Align the mounting frame hooks with the KA11 mounting slots and gently pull the KA11 unit down the mounting bracket. Make sure the mounting hooks are properly engaged.
Page 4 Failure to follow instructions contained in this Guide. Repair or attempted repair by anyone other than Remote Technologies To clean your KA11, lightly dampen a lint-free cloth with plain water or a mild detergent Incorporated. and wipe the touchscreen, keypad and outer surfaces.

Ka8