REMS Cento Instruction Manual
  1. Manuals
  2. Brands
  3. REMS Manuals
  4. Cutter
  5. Cento
  6. Instruction manual
REMS Cento Instruction Manual

REMS Cento Instruction Manual

Hide thumbs Also See for Cento:
1
2
3
4
5
6
7
8
Table of Contents

Advertisement

Quick Links

Download this manual
w w w. r e m s . d e
Instruction Manual
REMS Cento
REMS Cento RF
REMS DueCento

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Cento and is the answer not in the manual?

Questions and answers

Related Manuals for REMS Cento

Summary of Contents for REMS Cento

  • Page 1 . d e Instruction Manual REMS Cento REMS Cento RF REMS DueCento...
  • Page 2 Fig. 1 Fig. 2 Fig. 3  Cu-INOX (Art-Nr. 845050) Cu-INOX (Art-Nr. 845050) Cu-INOX  V, s 10 (Art-Nr. 845051)  St (Art-Nr. 845052)  Cu (Art-Nr. 845053)  RF (Art-Nr. 845054)  C-SF (Art-Nr. 845055)  P, s 21 (Art-Nr.
  • Page 3 Fig. 6 Fig. 7 Fig. 8 Fig. 9 Ø 40 – 70 Ø 70 – 110...

  • Page 4: General Power Tool Safety Warnings

    If operating a power tool in a damp location is unavoidable or there is the ● Only move or carry the REMS Cento / REMS Cento RF / REMS DueCento by likelihood of cutting into the cord, use a residual current device (RCD) the feed lever (6) when this has been locked as described in 2.2.

  • Page 5: Technical Data

    Pipe cutting machine, ring spanner size 27/17, one each of pipe guides Ø 75 mm and 110 mm, operating instructions. REMS DueCento Basic: Pipe cutting machine, ring spanner size 27/17, 2 height adjustable pipe rests 1 for pipes Ø 100 – 225 mm, Ø 4 – 8", feed lever, spring plug, instruction manual.

  • Page 6: Operation

    (5) can be placed on the rollers (3). To set the height of the pipe 2.4. Cutting pipes Ø 40 – 110 mm, Ø 1½ – 4" with REMS DueCento (Fig. 9) rest, place the pipe to be cut in the centre of the rollers (3) of the pipe cutting Place roller insert for cutting pipes Ø...

  • Page 7: Maintenance

    Pull out the mains plug before carrying out maintenance or repair work! With the REMS REG 10 – 54 E (13) pipes of Ø 10 – 54 mm, Ø ½ – 2⅛" can be This work may only be performed by qualifi ed personnel.

  • Page 8: Manufacturer's Warranty

    ● Rollers (3) of the pipe cutting machine and/or the roller insert (14) ● Change rollers. damaged. 5.8. Fault: A wavy cutting edge is made when cutting stainless steel drainpipes/downpipes (EN 1124) with REMS Cento RF. Cause: Remedy: ● Feeding pressure too high.

This manual is also suitable for:

Cento rfDuecento

Table of Contents