Download Print this page
REMS Cento DueCento Instruction Manual
REMS Cento DueCento Instruction Manual

REMS Cento DueCento Instruction Manual

Pipe cutting machines

Advertisement

Quick Links

REMS Cento
DueCento
INSTRUCTION MANUAL
PIPE CUTTING MACHINES
0508 4 ANCRA
www.ancranz.com

Advertisement

loading
Need help?

Need help?

Do you have a question about the Cento DueCento and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for REMS Cento DueCento

  • Page 1 REMS Cento DueCento INSTRUCTION MANUAL PIPE CUTTING MACHINES 0508 4 ANCRA www.ancranz.com...
  • Page 2 Fig. 1 Fig. 3  Cu-INOX (Art-Nr. 845050)  V, s 10 (Art-Nr. 845051)  St (Art-Nr. 845052)  Cu (Art-Nr. 845053)  RF (Art-Nr. 845054)  C-SF (Art-Nr. 845055)  P, s 21 (Art-Nr. 845057) Fig. 2 Fig. 4...
  • Page 3 Fig. 5 Fig. 6 Fig. 7 Fig. 8 Ø 40 – 70 Ø 70 – 100...
  • Page 4 When operating a power tool outdoors, use an extension cord suitable for ● Only move or carry the REMS DueCento by the feed lever (6) when this has ● Only move or carry the REMS DueCento by the feed lever (6) when this has outdoor use.
  • Page 5 WARNING REMS Cento and REMS DueCento are intended for the purpose of cutting and deburring the inside and outside of pipes. REMS Cento and REMS DueCento are intended for the purpose of cutting and deburring the inside and outside of pipes.
  • Page 6 (5) can be placed on the rollers (3). Outside burr (sawing burr) must be removed from the pipe otherwise the rollers will be damaged. Make must be removed from the pipe otherwise the rollers will be damaged. Make sure that the REMS cutting wheel (2) suitable for the pipe to be cut is selected/ sure that the REMS cutting wheel (2) suitable for the pipe to be cut is selected/ fitted. Do not allow the pipe (5) to knock against the cutting wheel (2) when fitted. Do not allow the pipe (5) to knock against the cutting wheel (2) when...
  • Page 7 ● Reduce feeding pressure. Cause: Remedy: ● Pipe not deburred on the outside. ● Deburr pipe on the outside. ● Rollers (3) soiled. ● Clean rollers with machine cleaner REMS CleanM (Art. No. 140119), then ● Pipe not round. ● Reduce feeding pressure. protect against rust. ● Pipe not deburred on the outside. ● Deburr pipe on the outside. ● Rollers (3) soiled.