REMS Nano Instruction Manual
Hide thumbs
Also See for Nano:
- Instruction manual (113 pages) ,
- Operating instructions manual (65 pages) ,
- Instruction manual (105 pages)
Related Manuals for REMS Nano
Summary of Contents for REMS Nano
- Page 1 REMS Nano Akku-Nano INSTRUCTION MANUAL NANO Electric Tube & Piping Cutter AKKU-NANO Cordless Pipe Cutter 0508 4 ANCRA www.ancranz.com...
- Page 2 Fig. 1 REMS Nano Fig. 2 REMS Akku-Nano Fig. 3...
- Page 3 ● Use REMS Herkules 3B (accessory, Art. No. 120100), REMS Herkules Y ● Use REMS Herkules 3B (accessory, Art. No. 120100), REMS Herkules Y e) Do not overreach. Keep proper footing and balance at all times. This enables e) Do not overreach.
-
Page 4: Technical Data
1.3. Application Area 1.3. Application Area ● Only use the battery in the REMS power tool. Only then is the battery safe ● Only use the battery in the REMS power tool. Only then is the battery safe REMS Nano, REMS Akku-Nano: REMS Nano, REMS Akku-Nano: from dangerous overloading. - Page 5 This switches off the power tool as soon as the battery needs to be recharged. This switches off the power tool as soon as the battery needs to be recharged. 2.2. Installing the Machine In this case remove the battery and charge with the REMS rapid charger. In this case remove the battery and charge with the REMS rapid charger. Place the electric pipe cutting machine on a REMS Jumbo E or REMS Jumbo 4. Maintenance 2.2. Installing the Machine 2.2. Installing the Machine collapsible workbench (accessory, Art. No. 120240 or 120200). Alternatively, Place the electric pipe cutting machine on a REMS Jumbo E or REMS Jumbo Place the electric pipe cutting machine on a REMS Jumbo E or REMS Jumbo 4.
- Page 6 Remedy: ● Rollers of the pipe rest (6) soiled. ● Clean rollers with machine cleaner REMS CleanM (Art. No. 140119), then ● Rollers of the pipe rest (6) soiled. ● Clean rollers with machine cleaner REMS CleanM (Art. No. 140119), then protect against rust.