Table of Contents
Advertisement
3. Fasten the mounting bracket to the mounting surface or junction box.
Note: It is recommended that silicone sealant be applied around the edge of the mounting
bracket or junction box to prevent moisture from entering the mounting surface.
4. Insert the mounting hooks on the rear of the camera into the mounting hook slots on the mounting
bracket, then let the camera hang.
Note: Before connecting any cables, ensure that the cable connections are properly
protected from moisture and corrosion. Make sure the protective cable boot is installed over
the Ethernet port to protect the connection from dust and moisture.
Mounting the Bullet Camera
7
Hide quick links:
Advertisement
Table of Contents
