Appliance Description; Using Your Appliance; Installing The Appliance; First Use - Krups EA819 ARABICA LATTE Manual

Water reservoir handle/lid
B Water reservoir
C Coffee grounds collector
D Coffee outlets
E Grill and removable drip tray
F Coffee bean reservoir lid
Coffee bean reservoir
G Grind fineness setting button
H
Metal burr mill
I Opening for the cleaning tablet
J
Cup tray
2
Screen and control panel
K Start/stop button
L
Recipe selection button
Danger : Connect the appliance to an earthed 230 V mains socket. Failure to do so means that you run the risk
of fatal injury due to electricity!
Respect the safety guidelines indicated in the "Safety guidelines" booklet.
Preparing the appliance
To prevent used water flows from dirtying your counter top or from potentially burning you, don't forget to insert the
drip tray. (E)
- Remove, fill the water reservoir and put it back in place. (1-2)
- Remove the coffee bean reservoir lid, pour in the coffee beans and put the lid back on. (3)

First use

- Switch the appliance on by plugging it in
- Press the start/stop button (4)
- The machine preheats, at the end of the cycle, the pictograms
- Place a container (at least 600 ml) under the coffee and steam nozzles, then press the start/stop key (7).
- The machine primes itself and rinses the hydraulic circuits (coffee and steam) for approximately 2 minutes.
- At the end of the cycle, the coffee recipe menu is displayed (8).
Installing the cartridge in the appliance: Sold separately
We advise the use of a Claris Aqua Filter System filter cartridge to eliminate all traces of chlorine and limescale. Limits
the formation of limescale and ensures your machine's longevity. The use of this cartridge ensures a more flavourful
coffee.
To perform the installation, you will need:
- 1 filter cartridge
- 1 container (minimum 600 ml)
Attention: to properly prime your filter cartridge, ensure that you have properly followed the installation
procedure at each set-up.
- Set the date by turning the grey ring located on the upper end of the cartridge (5).
- Screw the cartridge into the water reservoir (6).
- Press the settings and maintenance button
- Using the navigation key
- The pictograms

APPLIANCE DESCRIPTION

USING YOUR APPLIANCE

INSTALLING THE APPLIANCE

, select the pictogram
and press start flash.
M Favourites button
N Settings and maintenance button
O Start/stop button
P + or - button
Q Navigation button
3
Milk pot
R RLid
S Lock lever
T CAPPUCCINO/CLEAN selection knob
U Flexible tube for milk foam flow
V 3-part cassette which can be dismantled
W Container
X Steam nozzle
and press start
.
.
flash.
23