Parts And Features; Exterior Parts - Kenmore 722.1435 Series Use & Care Manual

Exterior Parts

1
2
3
4
NOTE: Do not remove the safety cover at any time.
Status LED
• Red : Error (See the Error Codes in Troubleshooting section.)
• White (steady): Normal operation
• White (blinking): Cycle has been paused. (After four minutes in pause mode, the machine turns off.)
• Green: Cycle finished normally.
The default "ON" setting keeps the green light on until the door is opened. If the setting is changed to "OFF", the green
light turns off after 90 seconds. To change the setting, turn the power on and press and hold the Sani Rinse button for 3
seconds until "ON" or "OFF" appears in the display. The setting is stored until you change it.
6

PARTS AND FEATURES

1 Control Panel
5
2 Door Handle
6
3 Front Cover
7
4 Lower Cover
5 Shipping Brace
6 Safety Cover
7 Status LED (3)
8
8 Base
9 Leveling Feet
9