Protecting The Environment; Technical Data - Black+Decker LD12 Original Instructions Manual

Warning! The use of any accessory
not recommended for use with this
tool could be hazardous.
Batteries
BLACK+DECKER batteries can be
recharged many times. At the end of
their useful life, discard batteries
with due care for our environment:
• Run the battery down completely, then
remove it from the tool.
• NiCd, NiMH and Li-Ion batteries are
recyclable. Take them to any authorized
repair agent or a local recycling station.

Protecting the environment

Separate collection. This product
must not be disposed of with normal
household waste.
Should you find one day that your
BLACK+DECKER product needs replace-
ment, or if it is of no further use to you, do
not dispose of it with household waste.
Make this product available for separate
collection.
Separate collection of used products
and packaging allows materials to be
recycled and used again. Reuse of recycled
materials helps prevent environmental
pollution and reduces the demand for raw
materials.
Local regulations may provide for separate
collection of electrical products from the
household, at municipal waste sites or by
the retailer when you purchase a new
product.
BLACK+DECKER provides a facility for the
collection and recycling of BLACK+DECKER
products once they have reached the end of
their working life. To take advantage of this
service please return your product to any
authorised repair agent who will collect
them on our behalf. You can check the
location of your nearest authorised repair
agent by contacting your local
BLACK+DECKER o ce at the address
indicated in this manual. Alternatively, a list
of authorised BLACK+DECKER repair
agents and full details of our after-sales
service and contacts are available on the
Internet at: www.2helpU.com.
(Original instructions)

Technical data

Voltage
No-load speed
Chuck
Torque
Charger
Output current
Charge time
Battery
Voltage
Capacity
Type
* Maximum initial battery pack voltage
(Measured without a workload) is 12 volts.
Measured under a workload, nominal
voltage is 10,8V.
ENGLISH
LD12
12V
0 - 900/min (rpm)
10 mm
16/7 Nm
1 A
1 to 1.5 hrs
12V
1.5 Ah
Integrate Lithium-Ion
11