The Link Receive Menu 9 1 - Texas Instruments TI-73 Explorer Manual Book

Chapter 13: Link and the CBLàCBR Application
To select data items to send from the sending unit to another
calculator, follow these steps:
Press 9 to display the
1.
2. Select
3. Select the type of data you want to send. The
corresponding
screen, except the one for
no data items selected.
Press $ and # to move the selection cursor (4) to an
4.
item you want to select or deselect.
Press b to select or deselect an item. Selected names
5.
are marked with a black box (0). To exit a
without transmitting any items, press - l.
6. Repeat steps 4 and 5 to select or deselect additional
items.

The Link RECEIVE Menu 9 1 "

You set up the TIN73 to receive data from another device using
the 9
1:Link RECEIVE
To communicate between two calculators, you must set up
one calculator to send the data and the other calculator to
receive the data. The following section describes how to set
up the TIN73 to receive data. To set up a TIN82 or TIN83, refer
to its user manual.
9
1:Receive
to display the
1:Link
SELECT
menu.
"
1
Sets unit to receive data transmission.
APPLICATIONS
menu.
Link SEND
screen is displayed. Each
, is displayed initially with
All+
SELECT LIST screen includes L1-L6
and any user-named lists.
257
menu.
SELECT
screen
SELECT