Transmission Error Conditions - Texas Instruments TI-73 Explorer Manual Book

260
Chapter 13: Link and the CBLàCBR Application
When you select
and you can enter another appropriate variable name
using the - } menu (for example, renaming
where
Pic2
the Text editor (- t) (for example, renaming
¨ABC
where
not enter the
that it is a list name. Press b to resume transmission.
Note: You cannot rename software applications or
constants (the
DuplicateName
When you select
overwrites the existing data stored on the receiving unit.
Transmission resumes.
When you select
the data in the duplicated variable name. Transmission
resumes with the next item.
When you select
receiving unit exits receive mode.

Transmission Error Conditions

A transmission error (
seconds if:
The unit-to-unit cable is not attached to the sending or
receiving unit. Note: If the cable is attached, push it in
firmly and try again.
The receiving unit is not set to receive transmission.
You attempt a backup between a TIN73 and a TIN82 or
TIN83.
You attempt a data transfer from a TIN73 to a TIN82 with
data other than numerical lists,
menu item
, the
1:Rename
is undefined), or you can enter text using
Pic2
¨ABC
is undefined). When renaming lists, do
(- v
¨
OPS 9
option is excluded from the
1:Rename
menu).
2:Overwrite
, the sending unit does not send
3:Omit
, transmission stops, and the
4:Quit
Error in Xmit
.
9:Vars to TI82
prompt is displayed,
Name=
). The calculator assumes
, the sending unit's data
) occurs after one or two
- , or without using
L L
1 6
to
Pic1
to
L
1