Chapter 13: Link and the CBLàCBR Application
During transmission, if the receiving unit does not have
sufficient memory to receive an item, the
displayed on the receiving unit.
To skip this item for the current transmission, select
. Transmission resumes with the next item.
1:Omit
To cancel the transmission and exit transmission mode,
select
2:Quit
Repeating a Transmission to an Additional TI-73
After sending and receiving data between two TIN73s, you can
repeat the same transmission without having to reselect data
items to send. Use the original sending unit only and as many
additional TIN73 units as necessary.
Simply repeat the transmission process without selecting or
deselecting any new items. Note: You cannot repeat the
transmission if you selected
DuplicateName Menu
During transmission, if a variable name is duplicated, the
DuplicateName
The duplicate variable name, L1,
and its type, LIST, are displayed.
1:Rename
2:Overwrite
3:Omit
4:Quit
.
All+
menu is displayed on the receiving TIN73.
Prompts you to rename the receiving
variable.
Overwrites data while receiving the
variable.
Skips transmission of sending variable.
Stops transmission.
Memory Full
or
.
All-
259
menu is