Advertisement
mini D nmpurlER
WIRING PREPARATIONS
0'
Test the alternator output. Factory alternators will produce 60 - 80 amperes at
best. Wear and heatwill reduce the output by 40%
.
0'
Alternator ground (-) must be reinforced. Use a 4-gauge cable instead of the
factory 8-gauge.
0'
Alternator positive (+) to battery (+) must be reinforced
.
Use 4-gauge cables.
0'
Check your battery condition as batteries degrades after a
whole.
0'
Battery (+) to amplifier (+) must be connected using a 4-gauge cable
.
0'
Ground amplifier to
vehicle's
chassis (bare metal) using 4-gauge cable, keep
the cable short (2 feet max)
.
0'
Use 1 Farad capacitorto compensate for surges in demando
0'
We recommend the use of one (1) auxiliary battery.
.,
Specifications are subject to change without notice
6
Advertisement
