Download Print this page

Hitachi WR 14DH Handling Instructions Manual page 38

Hide thumbs Also See for WR 14DH:

Advertisement

Available languages
  • EN

Available languages

English
You could get hurt or the movement of the socket
could shake the impact wrench so much as to
make you drop it.
10. Always charge the battery at a temperature of 0
– 40°C.
A temperature of less than 0°C will result in over
charging which is dangerous. The battery cannot
be charged at a temperature greater than 40°C.
The most suitable temperature for charging is that
of 20 – 25°C.
11. Do not use the charger continuously.
When one charging is completed, leave the charger
for about 15 minutes before the next charging of
battery.
12. Do not allow foreign matter to enter the hole for
connecting the rechargeable battery.
13. Never disassemble the rechargeable battery and
charger.
14. Never short-circuit the rechargeable battery.
Short-circuiting the battery will cause a great
electric current and overheat. It results in burn or
damage to the battery.
SPECIFICATIONS
POWER TOOL
Model
No-load speed
Capacity
Tightening torque
EB14B (2.0 Ah)
Rechargeable
battery
EB1430H (3.0 Ah)
Weight
CHARGER
Model
Charging time EB14B
EB1430H
Charging voltage
Weight
STANDARD ACCESSORIES
1. Charger (UC14YF2) ................................................... 1
2. Plastic case ................................................................ 1
Standard accessories are subject to change without notice.
37
15. Do not dispose of the battery in fire.
If the battery burnt, it may explode.
16. Do not insert object into the air ventilation slots
of the charger.
Inserting metal objects or inflammables into the
charger air ventilation slots will result in electrical
shock hazard or damaged charger.
17. Bring the battery to the shop from which it was
purchased as soon as the post-harging battery life
becomes too short for practical use. Do not dispose
of the exhausted battery.
18. Using an exhausted battery wil damage the
charger.
MODEL
WR14DH: with charger and case
WR14DH
–1
0 – 2300min
M8 – M16 (Ordinary bolt)
M8 – M12 (High tension bolt)
Maximum 147 N
m {1500 kgf
Tightening is M16 (F10T), when fully charged at 20°C temp.
Tightening time: 3 sec.
Ni-Cd battery, 14.4 V
Ni-MH battery, 14.4 V
2.2 kg
UC14YF2
Approx. 60 min. (at 20°C)
Approx. 90 min. (at 20°C)
7.2 – 14.4 V
1.3 kg
cm}

Advertisement

loading