Specifications; Standard Accessories - Hitachi WH 12DAF Handling Instructions Manual

English
12. Do not dispose of the battery in fire.
If the battery burnt, it may explode.
13. Do not insert object into the air ventilation slots of
the charger.
Inserting metal objects or inflammables into the
charger air ventilation slots will result in electrical
shock hazard or damaged charger.
MODEL
WH12DAF : with charger and case

SPECIFICATIONS

POWER TOOL
Model
No-load speed
Capacity
Tightening torque
Rechargeable battery
Weight
CHARGER
Model
Charging time
Charging voltage
Weight

STANDARD ACCESSORIES

1. Charger (UC12SD or UC24YFA) ................................. 1
2. Plastic case .................................................................. 1
Standard accessories are subject to change without
notice.
OPTIONAL ACCESSORIES ......... sold separately
1. Battery (EB1214L, EB1220BL, EB1222HL)
33
M4 – M10 (High tension bolt)
Tightening is M12 high tension bolt (strength grade 12.9), when fulley
charged at 20°C temp.
Tightening time: 3 sec.
EB1214L: Ni-Cd battery, 12 V (1.4 Ah, 10 cells)
EB1220BL: Ni-Cd battery, 12 V (2.0 Ah, 10 cells)
EB1222HL: Ni-MH battery, 12 V (2.2 Ah, 10 cells)
UC12SD
EB1214L: Approx. 60 min. (at 20°C)
12 V
1.4 kg
14. Bring the battery to the shop from which it was
purchased as soon as the post-charging battery life
becomes too short for practical use. Do not dispose
of the exhausted battery.
15. Using an exhausted battery wil damage the charger.
WH12DAF
0 – 2200 min –1
M4 – M8 (Small screw)
M4 – M12 (Ordinary bolt)
Maximum 88 N·m {900 kgf·cm}
1.6 kg
EB1220BL: Approx. 50 min. (at 20°C)
EB1222HL: Approx. 55 min. (at 20°C)
2. Plus driver bit
Bit No.
No. 2
No. 3
UC24YFA
7.2 – 24 V
0.6 kg
Code No.
992671
992672