8. When one charging is completed, leave the charger charger. at least 15 minutes before the next charging of 17. Use only genuine HITACHI replacement parts. battery. 18. Do not use power tools for applications other than Do not charge more than two batteries those specified in the Handling Instructions.
13. Do not insert object into the air ventilation slots of MODEL the charger. Inserting metal objects or inflammables into the WH12DAF: with charger and case charger air ventilation slots will result in electrical shock hazard or damaged charger. 14. Bring the battery to the shop from which it was purchased as soon as the post-charging battery life becomes too short for practical use.
When the pilot lamp does not go off even if more than two hours have elapsed after starting of the charging, stop the charging and contact your HITACHI 5. Drill chuck adapter set: Code No. 321823 AUTHORIZED SERVICE CENTER.
(2) Avoid recharging at high temperatures. Only Hitachi OPTIONAL ACCESSORIES plus driver A rechargeable battery will be hot immediately after bits (Bit No. 2; Code No. 992671, Bit No. 3; Code No. use. If such a battery is recharged immediately after 992672) may be used.
Page 15
continuously driving in screws, the components of 4. Use a tightening time suitable for the screw the electronic circuit parts may overheat and be The appropriate torque for a screw differs according damaged. to the material and size of the screw, and the material 3.
C: No. Used D: Remarks CAUTION Repair, modification and inspection of Hitachi Power Tools must be carried out by an Hitachi Authorized Service Center. This Parts List will be helpful if presented with the tool to the Hitachi Authorized Service Center when requesting repair or other maintenance.