Enable/Disable Remote Control Function; Selecting Battery Type; Locking/Unlocking Changes To Settings; Selecting Backlit Time - Lectronics DCHT Instruction Manual

DCHT, DCHT/E01

Enable/Disable Remote Control Function

The "dweedle tone" remote control is turned on or off
with the Remote menu, setting the transmitter to react
to tones received (Enable) or to Ignore the tones.
Setup... Remote
AutoOn?
ProgSw
Remote
NOTE: Remote control of settings is enabled
using a third party smart phone app named
DCHTRemote, published by New Endian, LLC.

Selecting Battery Type

The voltage drop over the life of different batteries var-
ies by type and brand. Be sure to set the correct battery
type for accurate indications and warnings. The menu
offers alkaline or lithium types.
Setup... BatType
BatType
Locked?
Backlit
If you are using rechargeable batteries, it is better to
use the timer function on the receiver to monitor the
battery life rather than the indicators on the transmitter.
Rechargeable batteries maintain a fairly constant volt-
age across the operating time on each charge and stop
working abruptly, so you will have little or no warning as
they reach the end of operation.

Locking/Unlocking Changes to Settings

Changes to the settings can be locked to prevent inad-
vertent changes being made.
Setup...
Locked?
BatType
Locked?
Backlit
A small padlock symbol will appear on adjustment
screens when changes have been locked.
When changes are locked, several controls and actions
can still be used:
• Settings can still be unlocked.
• Menus can still be browsed.
• Programmable switch still works (Mute and On/Off).
• Sync functions are still available.
14
Enable
Ignore
Alk.
Lith.
Gain
Yes
No
-40 -20

Selecting Backlit Time

Adjusts the duration of the LCD back light to 30 sec-
onds, 5 minutes, or to remain on.
Setup...
BatType
Locked?
Backlit

Turning LEDs Off/On

Options to turn the control panel LEDs on or off.
Setup...
Backlit
LED Off
Default

Restoring Default Settings

This is used to restore the factory settings.
Setup...
Backlit
LED Off
Default

About

Displays model number and firmware
version.
TopMenu...
25
Key...
Setup...
0 About
Backlit
On
30 sec
5 sec
LEDs
On
Off
Default
settings
No
Yes
About
DCHT
V1.10
/1.10
LECTROSONICS, INC.